manualshive.com logo in svg

Rockwell Automation PowerFlex 750-Series, Руководство пользователя

Поделиться
Скачать
Rockwell Automation PowerFlex 750-Series Скачать руководство пользователя страница 12

1-2

Getting Started

 

 

 

PowerFlex 750-Series Drive DeviceNet Option Module User Manual

Publication 750COM-UM002A-EN-P

Features

The features of the Option Module include:

•

Captive screws to secure and ground the module to the drive.

•

Switches to set a node address and network data rate before applying 
power to the drive. Alternately, you can disable the switches and use 
Option Module parameters to configure these functions.

•

Compatibility with various configuration tools to configure the 
Option Module and host drive. The tools include the enhanced 
PowerFlex 7-Class HIM (Human Interface Module) on the drive, 
and drive-configuration software such as DriveExplorer (version 
6.01 or higher) or DriveExecutive (version 5.01 or higher).

•

Status indicators that report the status of the Option Module and 
network communications. They are visible when the drive cover is 
removed.

•

Parameter-configurable 32-bit Datalinks in the I/O to meet 
application requirements (16 for writing data from the network, and 
16 for reading data to the network).

•

Explicit Messaging and UCMM (Unconnected Message Manager) 
support.

•

Multiple data exchange methods, including Polled, Cyclic, and 
Change of State (COS), to transmit data between the network and 
Option Module.

•

Master-Slave hierarchy that can be set up so that the Option Module 
and PowerFlex 750-Series drive transmit data to and from a scanner 
on the network.

•

User-defined fault actions to determine how the Option Module and 
connected drive respond to:

– I/O messaging communication disruptions (Comm Flt Action)
– Controllers in idle mode (Idle Flt Action)
– Explicit messaging disruptions for drive control via PCCC and 

the CIP Register Object (Msg Flt Action)

•

Faulted node recovery support. You can configure a device even 
when it is faulted on the network if you have a configuration tool that 
uses faulted node recovery and have set the Data Rate switch to 
position “3.” With this configuration, the Option Module uses 
parameter settings stored in EEPROM for the data rate and node 
address instead of switch settings.

•

Support for DPI routing, enabling access to any networked 
PowerFlex 7-Class drive using DriveExplorer (version 6.01 or 
higher) to monitor and configure that drive and its connected 
peripherals.

Содержание PowerFlex 750-Series

















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды