SECTION 1 — IN GENERAL
SSC-500 Hydraulic Press Solid-State Control
Rockford Systems, LLC
Call: 1-800-922-7533
7
(Continued on next page.)
Danger Sign(s) to be Mounted on Machine
Never operate this machine unless the danger sign(s) is in place.
If any danger sign becomes destroyed or unreadable, the sign
must
be replaced immediately. Contact factory for replacement danger sign(s).
“Mechanical Power Press Safety” Booklet
A copy of Booklet No. MPPS (“Mechanical Power Press Safety”) is available upon request. This booklet is copied verbatim from the CFR (Code
of Federal Regulations) and contains all relevant sections of the OSHA Regulations concerning power presses with which an employer (user) must
comply. The enclosed equipment must be installed, used and maintained to meet these regulations. Specifically, any time a foot switch is used,
a suitable
point-of-operation safeguard or device must be used
to prevent bodily injury. In addition,
every press must be provided with
a point-of-operation safeguard!
Please review this booklet and the appropriate ANSI (American National Standards Institute) Safety Standard
before installing the enclosed equipment. If you are unfamiliar with these detailed safety regulations, which include regulations on safeguarding the
point of operation properly, you may want to attend our regularly scheduled machine safeguarding seminar. To obtain detailed information about
this training seminar, please call, fax, write, or check our web site. Our address, telephone, fax number, and web site address are on the front
cover of this manual.
Part No. KSC-054
Danger Sign - Standard
Part No. KSC-054S
- Spanish
Part No. KSC-054F
- French
Reverse Side
Part No. KSC-055
Danger Sign
(Foot) - Standard
Part No. KSC-055S
- Spanish
Part No. KSC-055F
- French
S
ee page 6 for
details on this
pamphlet.
OPERATOR
SAFETY PRECAUTIONS
Handout for Anyone Operating This Machine
Before You Operate This Machine
You Must Read and Understand
These Safety Precautions
See Reverse Side for Other Safety Precautions.
OVER
Place Your Hands
or Any Part of
Your Body in This
Machine
Sign No. KSC-000
DANGER
OPERATOR
SAFETY PRECAUTIONS
Handout for Anyone Operating This Machine
Before You Operate This Machine
You Must Read and Understand
These Safety Precautions
See Reverse Side for Other Safety Precautions.
OVER
Place Your Hands
or Any Part of
Your Body in This
Machine
SIGN NO. KSC-000
Accompanying this equipment is a 5” x 6” polyethylene danger sign, Part No. KSC-054. This sign MUST BE PERMANENTLY
MOUNTED IN A PROMINENT LOCATION on the machine where this equipment is installed. This sign must be in a LOCATION
THAT IS EASILY VISIBLE to the operator, setup person, or other personnel who work on or around this machine. ALWAYS
mount this sign with screws or rivets when installing the enclosed equipment. If a foot switch is ordered, a 5” x 6”
polyethylene danger sign, Part No. KSC-055 is provided. This sign must also be mounted according to the above instructions.
Front Side
DO NOT REMOVE OR COVER THIS SIGN - SEE BACK FOR MOUNTING
Part No. KSC-054
Do not remove or cover this sign–see back for mounting instructions
Part No. KSC-054
You are exposed to moving
machine parts that can crush,
dismember and cause death.
DO NOT
operate this machine with-
out safeguards in place.
This sign does not cover all dangers that
could happen while operating this machine
.
CLOSING RAM AND DIE
NEVER
place your hands or any
part of your body in this
machine.
FAILURE
to obey will result in loss
of fingers or limbs, or
could cause death.
Front Side
