SECTION 4 — PROGRAMMING
SSC-500 Hydraulic Press Solid-State Control
Rockford Systems, LLC
Call: 1-800-922-7533
25
(Continued on next page.)
Standard Programming Overview
The following sections outline the standard programming of the SSC-
500 control system on hydraulic machines after installation of all
components has been completed.
MAIN PROGRAM MENU
All programming is done by selecting
PROG
(Program) on the key
selector switch as shown in Figure 4.3. Turn the keyed selector switch
to the
PROG
position.
The LCD display will display one of the following program options from
the list as shown. At the top of the list is
CLEAR STROKE
.
Pressing the
t
and
s
buttons on the keypad will scroll through the
program options that can be modified. When the program option you
want to edit is displayed, press
ENTER
. Once the required information
is entered and the
ENTER
key is pressed again, the display returns to
the main menu list. If incorrect information has been entered, return to
the setting and reenter the correct information.
STANDARD PROGRAM SELECTION
CLEAR STROKE .................................................................... 26
CLEAR BATCH ..................................................................... 27
BATCH PRESET .................................................................... 27
BOTTOM DWELL ms ............................................................ 28
DECOMPRES TMR ms ......................................................... 28
ANTI-TIEDOWN ms .............................................................. 29
SING RETURN MODE ........................................................... 29
OPTIONAL PROGRAM SELECTION
PSDI TIMER sec .................................................................. 30
ASING MODE ...................................................................... 30
ASING TMR sec ................................................................... 31
USER INPUTS .............................................................. 31 - 32
INPUT #1 ......................................................................... 32
INPUT #2 ......................................................................... 32
INPUT #3 ......................................................................... 32
INPUT #4 ........................................................................ 32
OPTIONS EDIT ...................................................................... 33
(PROGRAM MODE)
CLEAR STROKE
CLEAR BATCH
BATCH PRESET
BOTTOM DWELL ms
ANTI-TIE-DOWN ms
ASING MODE
ASING TMR SEC
INPUT #1
INPUT #2
INPUT #3
INPUT #4
ENTER
Selects the Program
Menu Item
RUN
PROG
OFF
Scrolls through the
Program Menu Items
Figure 4.3
Main Program Menu Flowchart
