manualshive.com logo in svg

Rockford Fosgate SSC-500, Руководство по установке

Поделиться
Скачать
Rockford Fosgate SSC-500 Скачать руководство пользователя страница 15

SECTION 3 — INSTALLATION OF COMPONENTS 

SSC-500 Hydraulic Press Solid-State Control

Rockford Systems, LLC
Call: 1-800-922-7533  

15

(Continued on next page.)   

Photo 3.1
Standard Control Box with Keypad/Display

Photo 3.2
Inside View of Standard 
Control Box

Control Transformer

Master Control Relay

SSC-500 Control Module 

Assembly

Logic Power 

Supply 

Transformers

Terminal Strip

Keypad/Display

Installation of Control Package Components

LITERATURE PACKET

Included with every shipment is a literature packet. This includes installation manuals, “Operator Safety Precaution” Pamphlet (Part No. KSC-000), 
danger sign(s) (next page), and electrical schematics. These publications must be available and fully understood by all appropriate personnel, before 
any retrofit installation begins. Please notify Rockford Systems, LLC immediately if there are any questions about the information received.

 

Danger Sign (Standard) - Part No. KSC-054

 

 As illustrated on page 7, a 5” x 6” polyethylene danger sign is supplied. It is imperative that this sign be firmly 
attached to the machine in a location readily visible to all personnel. Suggested mounting instructions are 
shown on the reverse side of this sign.

 

 This sign must be the first thing mounted to prevent any possibility that it might be overlooked. If this sign 
becomes destroyed or unreadable, it must be replaced immediately. Contact factory for replacement and do 
not operate the machine until the danger sign is in place.

 

Foot Switch Danger Sign - Part No. KSC-055

 

If a foot switch is ordered, a 5” x 6” polyethylene danger sign is furnished. This sign must be firmly attached  

 

to the machine in a location readily visible to all personnel.

CONTROL BOX WITH SSC-500 CONTROL MODULE ASSEMBLY

The control box furnished for your machine may vary with the equipment furnished. The standard control box is furnished with the keypad/display on 
the front of the enclosure; however, if it is a custom control box with a starter and disconnect, the control box enclosure will be larger. The keypad/
display, ground indicator light, off/program/run selector, and selector switches can also be furnished in a remote station. This option provides easier 
accessibility to the operator. 

DO NOT REMOVE OR COVER THIS SIGN - SEE BACK FOR MOUNTING

Part No. KSC-054

Do not remove or cover this sign–see back for mounting instructions

Part  No. KSC-054

You are exposed to moving 

machine parts that can crush,

dismember and cause death. 

  DO NOT 

operate this machine with-

 

out safeguards in place. 

This sign does not cover all dangers that
could happen while operating this machine

.

CLOSING RAM AND DIE

  NEVER 

place your hands or any 

  

part of your body in this

  

machine.

  FAILURE 

to obey will result in loss

  

of fingers or limbs, or 

  

could cause death.

Sign No. KSC-054

Sign No. KSC-055

Содержание SSC-500













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды