Riello 20187642, Инструкция по установке и эксплуатации

Страница: 25 / 36

25
ENGLISH
EN
The day will be highlighted and others can be selected using the same procedure
CONFIRM
.
MON TUE
SAT
WED
SUN
THU FRI
USE THE ARROWS TO MODIFY
CONFIRM
SELECT DAYS ON WHICH YOU WANT TO COPY SCHEDULE OF
THURSDAY
MAIN
Once the operation completed the display will show:
USE THE ARROWS TO MODIFY
SCHEDULE OF THURSDAY WILL BE COPIED ON THE
DAYS : TUESDAY
MAIN
13 HOW TO USE...
AMBIENT REGULATOR = machine int room temperature regulation and time
schedule
In addition to the machine interface functions described above, the REC10CH performs the
room temperature regulation and time schedule functions.
Chronothermostat = room temperature regu time schedule of the associated
zones
In this configuration, the REC10CH does not perform the machine interface functions,
which continue to be performed by the boiler REC10CH, but performs the function of room
temperature regulation and time schedule of the associated zone.
In the MAIN screen you can select:
- MODE / AMBIENT SETPOINT / INFO (see “10 INFO”) / MENU.
FRI
09/04/2021 12:17
MENU
INFO
20.0°C
MAIN
PROGRAM AUTO
MODE
26
°C
.5
1.3 bar
13.1 Mode
Unlike that which was indicated for the user interface function, in this case the mode refers
to the zone’s adjustment mode. The available modes are the following:
-
AUTO: the ambient temperature is adjusted based on the weekly time schedule that
has been set.
-
ECO: similar to AUTO mode, but with the temperature set-point reduced by 3°C in
HEATING AND HOT WATER mode, and increased by 3°C in HOT WATER ONLY mode
(if COOLING is enabled).
-
HEAT OFF: indicates that a heating request is never activated for that zone, a minimum
ambient temperature of 8°C is guaranteed in HEATING AND HOT WATER mode and a
maximum temperature of 40°C is guaranteed in HOT WATER ONLY mode (if COOLING
is enabled).
AUTO
ECO
HEAT OFF
MAIN
13.2 Ambient setpoint
By selecting the ambient set-point, the user can activate COMFORT adjustment mode. This
mode consists of setting an ambient temperature set-point value for a time-limited interval.
Once the temperature has been selected, the user is prompted to enter the duration of the
interval in question. Once the set time has elapsed, the mode switches back to that which
was previously set.
FRI
09/04/2021 12:17
MENU
INFO
MAIN
PROGRAM AUTO
MODE
26
°C
.5
20.0°C
1.3 bar
To activate COMFORT mode, highlight the temperature using the “ + ” and “ - ” keys. Once the
selection has been confirmed by pressing ENTER , the temperature value will start to flash.
Press “ + ” and “ - ” keys to modify the temperature in steps of 0.5°C.
Once the selection has been confirmed, a new screen will appear, prompting the user to set
COMFORT mode duration.
Make the modification using the “ + ” and “ - ” keys. The selected value can range from 30
minutes to 24 hours, with 30 minute intervals.
After confirming, a summary will be displayed indicating the temperature and duration of
COMFORT mode.
The user will once again be prompted to confirm the selections made.
COMFORT mode temperature and duration programming can be abandoned at any time
by pressing BACK .
01 : 00
YOU ARE ACTIVATING
COMFORT
MODE
ENTER TIME DURATION IN HOURS
TEMPERATURE WILL BE ADJUSTED
WITH NEW TARGET SET POINT
UNTIL 09/04/2021 ON 13:15
1.ZONE1
CONFIRM CANCEL
00 : 30
YOU ARE ACTIVATING
COMFORT
MODE
ENTER TIME DURATION IN HOURS
USE THE ARROWS TO MODIFY
1.ZONE1
26
°C
.5
MENU MODE
20.0°C INFO
FRI
09/04/2021 12:17
1.ZONE1
PROGRAM AUTO
13.3 Menu
The MENU function provides access to the configuration of SET BOILER, SETTINGS and
TIME SCHEDULE.
This is done by using the “ + ” and “ - ” keys to highlight the required item, then pressing
ENTER to confirm.
Press BACK to return to the initial screen without making any selection.
TIME SCHEDULE
SETTINGS
SELECT OPTION
MENU
SET BOILER
13.3.1 Set boiler (Chronothermostat)
Press “ + ” and “ - ” keys to modify the delivery set-point, then press ENTER to confirm.
NOTE: If an outdoor temperature sensor is connected, the delivery set-point is automatically
calculated by the machine for heating in HEATING AND HOT WATER mode, while it
continues to be manually set by the user for cooling in HOT WATER ONLY mode.
Press BACK to return to the MENU screen without making any selection.
The user is then asked to confirm the setpoint setting : select ENTER or BACK with the “ + ”
and “ - ” keys then press ENTER to confirm .
Once the selection is confirmed, the display returns to the MENU screen.
If the selection is cancelled or the BACK key is pressed, the display returns to the previous
MENU screen.
CONFIRM OR DELETE SELECTION
CONFIRM CANCEL
THE PARAMETER WILL BE
CHANGED
80,5
°C
SET BOILER
13.3.2 Settings
Select this function to modify:
- TIME AND DATE / DAYLIGHT SAVING TIME / LANGUAGE / BACKLIGHT
To modify the settings, please refer to the following sections:
- “11.1 Settings”
- “11.1.1 Time&Date”
- “11.1.2 Daylight savings time”
- “11.1.3 Language”
- “11.1.4 Backlight”
NOTE: if the zone is controlled by an ambient probe, the same settings can be made from
the REC10CH MASTER on the screen of the zone concerned.
13.3.3 Time schedule (Room regulator and chronothermostat)
From this menu it is possible to access the display and adjustment of the time schedule.
Up to 4 bands can be set for each day of the week, characterized by a start time and an end
time. In this operating mode, the time schedule also allows the setting of a room temperature
setpoint as described below.
To add a time slot, do the following:
- select ADD and confirm with ENTER
- press “ + ” and “ - ” key to increase or decrease the start time by 30 minutes and confirm
with ENTER
- press “ + ” and “ - ” to increase or decrease the end time by 30 minutes and confirm with
ENTER
- press “ + ” and “ - ” to increase or decrease the setpoint value by 1°C and confirm with
ENTER .
07:30 08:30
11:30 13:30
18:00 22:30
START
THURSDAY
ADD
MODIFY
DELETE
COPY
SELECT OPTION
END
MAIN
OTHER TIMES
22.0°C
22.0°C
22.0°C
SETP
16.0°C
Continue with the scheduling of the other time bands.
For a detailed description of the other functions relating to time schedule (MODIFY - DELETE -
COPY) refer to paragraph “12 PROGRAMMING TIMING”.
NOTE: note how, in the presence of a zone regulated by REC10CH in chronothermostat
configuration, it is no longer possible to set the relative time schedule on the REC10CH which
performs the machine interface functions. The latter will be managed only by the corresponding
REC10CH chronothermostat.
NOTE: if the zone is controlled by an ambient probe, the same settings can be made from the
REC10CH MASTER on the screen of the zone concerned.