65
Installation
EN
NXC 017-021
• Open the machine protection using a screwdriver with
magnetic tip, as indicated in the figure, remove the bag
and close the protection again.
• The device is secured to the pallet by 4 screws (two at the
front, and two at the back), which must be removed.
A
B
It is forbidden to disperse the packaging materials into
the environment or to leave them within the reach of
children, as they could pose a potential hazard. These
must be disposed of in accordance with the current legi-
slation.
For machine lifting operations refer to the figu-
res below. For the NXH model pay attention to in-
sert the lift forks in correspondence of the arrows A
or use slots B for lifting operations with slings.
NXC 026-040
NXH 026-040
