HotSpot Printer Operator’s Guide
67
B
User List
Management
This section allows you to modify the default User Name and
Password. It also provides facilities to create additional
administrator accounts.
Important
:
•
The User Name and Password must be numeric in order to
access Operator Mode from the HotSpot Printer control panel, as
the attached HotSpot Keypad only supports entry of numbers.
See
Appendix 2: HotSpot Keypad Layout & Operation
.
•
There is no password reset or restore capability.
C
HTTP Proxy
Settings
The HTTP Proxy Settings section allows the user to configure the
Mobile Printing Service
to work in network situations where all traffic
has to go through an HTTP Proxy. For network proxies that do not
use these particular features, the configured values on the Proxy
Tab are ignored, so the default values do not need to be changed.
Settings include the following:
■
Enable HTTP Proxy
: Select desired box. When selected, the
following functions are enabled.
-
Use Web Proxy Auto Discover
: Allows you to attempt
automatic detection of proxy configuration information on
your local network using automatic detection protocols. If a
proxy is found, the
application
displays the proxy URL in the
Proxy Address
field.
Authenticating proxies, (those that require username/
password credentials) are not supported with Web Proxy
Automatic Discovery. Manual Configuration must be used for
authenticating proxies. For non-authenticating proxies, any
username/password data is ignored.
-
User Manual Configuration
(default): Allows manual
configuration of proxy settings.
■
Proxy Address
: Defines the address for the proxy server.
■
Proxy Port
: Defines the TCP port for the proxy server.
■
User Name
: Specifies the User Name for proxies which require
authentication.
■
Password
: Specifies the Password for proxies that require
authentication.
■
Re-enter Password
: Confirms the password entered in the
Password field is the same.
[
Save Settings
]: Click to save all settings.
