HotSpot Printer Operator’s Guide
21
Step E:
Install POP Display (optional)
Your new HotSpot Printer ships with an envelope containing a point-of-purchase (POP) display and
two plastic holders. In order to install the POP display, proceed as follows:
1.
Remove POP display and plastic holders from envelope.
2.
Slide POP display in groove of plastic holders. Space
holders evenly along bottom edge.
3.
Remove holders’ adhesive strips. Place on top of the
HotSpot Printer, as shown in Fig. 3.
Fig. 3
Note
:
•
Placement of the POP display varies depending on the printer model.
•
POP display adds approximately 10.5
″
in height. When adding toner, remove the display or
allow for clearance.