Ricoh LD430c, Руководство по эксплуатации, Страница: 99 / 964

Network Settings
21
1
Note
❒
In
[ Effective Protocol ]
, check that the protocol you want to use is set to
[ Active ]
.
❒
[ LAN Type ] is displayed when the wireless LAN interface board is installed. If
both ethernet and wireless LAN (IEEE 802.11b) are connected, the selected in-
terface takes precedence.
❒
When
[ POP before SMTP ]
is set to
[ On ]
, also make setting for
[ Reception Protocol ]
and [ POP3 / IMAP4 Settings ] .
❒
When setting
[ POP before SMTP ]
to
[ On ]
, check
[ POP3 ]
port number in
[ E-mail
Communication Port ] .
Reference
p.58 “Interface Settings”
p.68 “File Transfer”
Interface Settings/Network Permit SNMPv3 Communication As required
Interface Settings/Network Host Name As required
File Transfer SMTP Server Neccessary
File Transfer SMTP Authentication As required
File Transfer POP before SMTP As required
File Transfer Reception Protocol As required
File Transfer POP3 / IMAP4 Settings As required
File Transfer Administrator's E-mail Address As required
File Transfer E-mail Communication Port As required
File Transfer Program / Change / Delete E-mail
Message As required
File Transfer Scanner Resend Interval Time As required
File Transfer Number of Scanner Resends As required
Menu User Tool Setting Requirements