Ricoh LD430c, Руководство по эксплуатации, Страница: 407 / 964

When a Job is Not Performed
13
1
When a Job is Not Performed
If you cannot execute a function, it may be that the machine is being held up by
another function.
If you cannot execute a function, terminate any other functions currently active,
and then try executing the function again. In certain cases, you can carry out an-
other job (copier, document server, facsimile, printer, scanner) without cance-
ling the current job being performed. Performing multiple functions
simultaneously like this is called “Multi-accessing”.
Combination Chart
❖
Function Compatibility
The chart shows Function Compatibility when print priority is set to “Inter-
leave”. See “Print Priority”, General Settings Guide.
|
: Simultaneous operations are possible.
$
: Operation is enabled when the relevant function key is pressed and re-
mote switching (of the scanner/external extension) is done.
: Operation is enabled when the
{
Interrupt
}
key is pressed to interrupt the
preceding operation.
→
: Operation is performed automatically once the preceding operation ends.
×
: The operation must be started once the preceding operation ends. (Simul-
taneous operations are not possible.)
AthenaC1_Trouble_F-EN_FM_forPaper.book Page 13 Thursday, January 12, 2006 2:03 PM