Ricoh LD430c, Руководство по эксплуатации, Страница: 255 / 964

Box Settings
177
4
E
Select the box to program.
When programming a new box, press [ *Not Programmed ] .
To change a box already programmed, press it, and then proceed to step
H
.
F
Press [ Transfer Box ] .
G
Enter a Box name, and then press [ OK ] .
H
Enter a SUB Code.
To change the SUB Code, press [ Clear ] or the
{
Clear/Stop
}
key, and then try
again. To change Box name, press [ Box Name ] , and then repeat from step
G
.
I
Specify the condition of registration.
J
To program End Receivers, select an End Receiver.
You can store five End Receivers.