manualshive.com logo in svg

Ricoh LD430c, Руководство по эксплуатации, Страница: 49 / 964

Поделиться
Скачать
Ricoh LD430c Скачать руководство пользователя страница 49

35

3. Appendix

This section describes Dos and Don'ts and copy paper.

Dos and Don'ts

The following items should be followed during use of this machine.

R

 

CAUTION:

R

 

CAUTION:

Important

❒

Do not turn the power off while the On indicator is lit or blinking. Doing so
may damage the hard disk.

❒

Before unplugging the power cord or turning off the main power switch,
make sure remaining memory space is at 100%, as shown on the screen. See
“Turning Off the Power”, “Turning Off the Main Power”.

❒

Do not touch areas on or around the fusing unit. These areas get hot.

❒

After scanning originals continuously, the exposure glass may become warm
- this is not a malfunction.

❒

The area around the ventilation hole might feel warm. This is caused by ex-
haust air and is not a malfunction.

❒

If the machine is moved from a cold to a warm place, condensation may form
inside it. After moving the machine, do not use it for at least an hour. The ma-
chine requires this time to adapt to its new environment.

❒

The machine will malfunction if its internal temperature becomes too high. Be
sure not to block the intake and exhaust vents.

❒

Do not turn off the power while the machine is in operation. See “Turning Off
the Power”, “Turning Off the Main Power”.

❒

Do not open the covers of the machine when it is in operation. If you do, mis-
feeds might occur.

❒

Do not move or tilt the machine when the power is on.

❒

Do not allow small objects such as paperclips to fall into or become stuck in-
side the machine.

❒

Do not knock the machine while it is operating (for instance, do not use the
machine's surfaces to knock stacks of paper into square).

 

•

Keep the machine away from flammable liquids, gases, and aerosols. A fire 
or an electric shock might occur.

 

•

Unplug the power cord from the wall outlet before you move the machine. 
While moving the machine, you should take care that the power cord will 
not be damaged under the machine.

AthenaC1_Intro_F-EN_FM_forPaper.book  Page 35  Wednesday, December 21, 2005  9:02 AM

Содержание LD430c





































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов