Ricoh LD430c Скачать руководство пользователя страница 434

Страница: 434 / 964

Troubleshooting When Using the Facsimile Function

Background of received
images appears dirty.
Images from the back of
the page appear.

Image density is too high.

Adjust scan density. See “Image
Density (Contrast)”, Facsimile
Reference.

Printed or sent images
are spotty.

The ADF, exposure glass or scan-
ning glass is dirty.

Clean them. See p.121 “Maintain-
ing Your Machine”.

Make sure that ink or correction
fluid is dry before placing origi-
nals.

Received image is too
light.

When using moist, rough, or
processed paper, areas of print
may not be fully reproduced.

Only use recommended paper.
See “Copy Paper”, About This
Machine.

Received image is too
light.

When

is blinking, toner is be-

ginning to run out.

Add toner. See p.89 “Adding
Toner”.

Received image is too
light.

• The image density has been

set too low.

• The original of the transmit-

ted fax was printed on paper
that is too thin.

• Increase the scanning density.

See “Image Density (Con-
trast)”, Facsimile Reference.

• Ask the sender to reprint the

original on thicker paper and
fax it again.

Problem

Cause

Solution

AthenaC1_Trouble_F-EN_FM_forPaper.book Page 40 Thursday, January 12, 2006 2:03 PM

Содержание LD430c





































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание LD430c

Отзывы:

Ricoh LD430c, Руководство по эксплуатации, Страница: 434 / 964

Результаты поиска

Содержание LD430c

Отзывы: