manualshive.com logo in svg

Ricoh LD430c, Руководство по эксплуатации, Страница: 447 / 964

Поделиться
Скачать
Ricoh LD430c Скачать руководство пользователя страница 447

When You Cannot Print

53

4

Printing does not start.

If the machine is operating in an 
extended wireless LAN, the re-
ceiver's MAC address may be 
preventing communication with 
the access point.

Check access point settings when 
in the infrastructure mode. De-
pending on the access point, cli-
ent access may be limited by 
MAC address. Also, check there 
are no problems in transmission 
between access point and wired 
clients, and between access point 
and wireless clients.

Printing does not start.

The extended wireless LAN has 
not started.

Confirm the orange LED is lit, 
and the green LED is lit or blinks 
during transmission.

Printing does not start.

The login user name, login pass-
word, or driver encryption key is 
invalid.

Check the login user name, login 
password, or driver encryption 
key.

Printing does not start.

Advanced encryption has been 
set using the Extended Security 
function.

Check the settings of the Extend-
ed Security function with the ad-
ministrator.

Data-in lamp does not 
blink or light up.

If the data-in lamp is unlit or not 
flashing even after performing 

[

Print

]

, the machine has not re-

ceived the data.

• When the machine is connect-

ed to a computer via a cable, 
check the computer print port 
settings are correct. See “Con-
firming the Connection Meth-
od”, Printer Reference.

• When it is networked with a 

computer, Contact the admin-
istrator. 

The status indicator of 
the printer is lit.

The cause is displayed on the dis-
play of the control panel.

Check the error message on the 
display panel and take required 
action. See p.49 “When a Message 
appears”.

“

Updating the 

destination 

list... Please 

wait. Specified 

destination(s) 

or sender's name 

has been 

cleared.

” appears.

The destination list is being up-
dated from the network using 
SmartDeviceMonitor for Admin.

Wait until the message disap-
pears. Do not switch off the pow-
er while this message is 
displayed. Depending on the 
number of destinations to be up-
dated, there may be some delay 
before you can resume operation. 
Operations are not possible while 
this message is displayed.

Problem

Cause

Solution

AthenaC1_Trouble_F-EN_FM_forPaper.book  Page 53  Thursday, January 12, 2006  2:03 PM

Содержание LD430c





































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов