Ricoh AP204, Руководство оператора, Страница: 98 / 301

79
Cleaning and Adjusting the Printer
6
Tray2:W
UT
/#
-(-----
♦
-----)+
I
Use
{U} {U}
{U} {U}
{U}
and
{T} {T}
{T} {T}
{T}
to display “4.
Registration”, and then press
{ {
{ {
{
En-
ter
} }
} }
}
.
The following display appears.
J
Use
{U} {U} {U} {U} {U}
and
{T} {T} {T} {T} {T}
to adjust the reg-
istration.
The above shifts the image to the
right.
K
After you are finished, press
{ { { { {
En-
ter
} } } } }
.
This registers your setting and re-
turns to the “Maintenance” menu.
L
Press
{ {
{ {
{
On Line
} }
} }
}
.
The normal display screen appears.
Tray2:W
UT
/#
-<-----+---
♦
->+
D
After confirming that “Config.
Page” is on the display, press
{ { { { {
En-
ter
} } } } }
.
E
Press
{ { { { {
Enter
} } } } }
again.
This prints the Configuration Page.
Important
❐
If printing does not start, check
the panel display for any error
messages and take the action re-
quired to correct the problem.
=> P.56 “Error & Status Messages
on the Operation Panel”
F
After confirming that the “Config.
Page” Menu on the display, press
{ {
{ { {
Escape
} }
} } }
.
The following display appears.
<Menu>
U
List Print
T
G
You can find the crop marks on the
trailing edge of the configuration
page. Check if the left (
1 1 1 1 1
) and
right (
2 2 2 2 2
) margins on the trailing
edge of the configuration page as
shown in the illustration.
H
If the left and right margins are not
the same, use
{U} {U} {U} {U} {U}
and
{T} {T} {T} {T} {T}
to dis-
play “Maintenance”, and then
press
{ { { { {
Enter
} } } } }
.
The “Maintenance” menu appears.
<Maintenance>
U
1.Toner Level
T
Image