Ricoh AP204 Скачать руководство пользователя страница 163

Страница: 163 / 301

Windows NT 4.0 Configuration

Click

[Network]

, and click

[Browse]

On the network tree, double-click the name of the computer used as the
print server.

The printers attached to the network are displayed.

Select the name of the printer you want to use by clicking it, and click

[OK]

Click

[OK]

Confirm that the port name is displayed in the

[Print to the following port]

box,

and click

[OK]

Windows NT 4.0

Use the

[Printers]

window to set up the printer.

Click

[Start]

, point to

[Settings]

, and then click

[Printers]

Double-click the

[Add Printer]

icon.

This launches the Add Printer Wizard.

Click

[Network printer server]

, and click

[Next >]

In the

[Shared Printers]

box, double-click the name of the computer used as a

print server.

The printers attached to the network are displayed.

Highlight the printer you want to use by clicking it, and click

[OK]

Note

❒

If the printer driver is not installed in the print server, a message appears.
If a driver has been installed on the client, click

[OK]

, and follow the in-

structions on the screen.

❒

There is a Windows NT 4.0 printer driver in the \DRIV-
ERS\IPDL_C\NT40 directory of the CD-ROM that comes with the printer.

Select whether you use this printer as the default printer, and click

[Next >]

After installation is complete, click

[Finish]

The icon of the newly installed printer appears in the

[Printers]

window.

Содержание AP204













































































































































































































































































































Результаты поиска

Содержание AP204

Отзывы:

Ricoh AP204, Руководство оператора, Страница: 163 / 301

Результаты поиска

Содержание AP204

Отзывы: