Ricoh AP204 Скачать руководство пользователя страница 160

Страница: 160 / 301

Preparing for a Network Connection

Reference

For more information, refer to the Operation Instructions of your printer.

Note

❒

Any port can be selected during the installation, however, LPT1 is recom-
mended.

In the

[Printers]

window, highlight the icon of the printer you want to use

by clicking it. On the

[File]

menu, click

[Properties]

Click the

[Ports]

tab, and then click

[Add Port]

In the

[Available Printer Ports]

box, highlight

[Multi Direct Print]

by clicking it,

and then click

[New Port]

The

[Select Printer]

dialog appears, and the printers which can print with TCP/

IP are displayed.

Limitation

❒

If PRINTER MANAGER FOR CLIENT is not installed in your computer,
printers which can print with TCP/IP are not displayed.

❒

Printers might be displayed when NetBEUI is selected as a protocol. How-
ever, the Network Interface Board does not support NetBEUI printing.

Note

❒

The printers which have replied to a broadcast from the computer are list-
ed here. To print to a computer that is not on this list, or to directly input
the port name, highlight

[New Printer]

by clicking it, and click

[Next >]

, and

then input the port name with procedure

Select the printer you want to use by clicking it, and click

[Next >]

Reference

If you want to know more about a particular item in the dialog, refer to

⇒

P.61

“Multi Direct Print”

Note

❒

You can identify the “Printer Name” and “Address” on the “configuration
page” printed by the printer.

To confirm that the port name of the printer is correct, click

[Next >]

If you did not select a printer with the previous procedure, you must input
the IP address of the Network Interface Board into the

[IP Address]

box.

Note

❒

You can input the host name or a domain name instead of an IP address
into the

[Port Name]

box.

❒

When you use DHCP to assign IP addresses to Network Interface Boards,
you can use a printer name as the host name. Consult your network ad-

Содержание AP204













































































































































































































































































































Результаты поиска

Содержание AP204

Отзывы:

Ricoh AP204, Руководство оператора, Страница: 160 / 301

Результаты поиска

Содержание AP204

Отзывы: