Ricoh AP204, Руководство оператора, Страница: 173 / 301

NetWare Configuration
30
3
E
F
Select the name of the Network Interface Board which is to be configured
by clicking it, and click
[Next >] .
Note
❒
If you don't know which Network Interface Board you are configuring,
print the Configuration Page using the printer's operation panel, and select
the MAC address that is on the page.
G
Confirm that the MAC and IPX addresses are correct, and click [Finish] .
[NIB Setup Tool] window appears.
H
Click [Configure] .
The property sheet appears.
I
Click the [NetWare] tab, and make the following settings.
A
In the [Print Server Name] box, input the name of the print server.
B
In the [File Server Name] box, input the name of the file server in which a
print server is to be created.
Clicking [Browse] , you can select a file server among those listed in the
Browse dialog.
C
In the [Print server Operation mode] group, click [As Print Server] .
D
Click [OK] to close the property sheet.
E
After the message appears to confirm the reboot, click
[Yes]
.
J
In the [NIB] menu, click [Exit] to exit the NIB Setup Tool.
K
Input “PCONSOLE” from the command prompt.
F:> PCONSOLE
L
Create a print queue as follows.
Note
❒
If you use a currently defined print queue, proceed to the step
L
.
A
In the [Available Options] menu, select [Print Queue Information] .
B
Press
{{{{
Insert
}}}}
and input a print queue name.
C
Press
{{{{
Esc
}}}}
to return to the [Available Options] menu.
M
Create a printer as follows.
A
In the [Available Options] menu, select [Print Server Information] .
B
To create a new print server, press
{{{{
Insert
}}}}
and input a print server name.
If you use an currently defined print server, select one of the print servers
shown in the
[Print Server] list.