Ricoh AP204 Скачать руководство пользователя страница 253

Страница: 253 / 301

Using RICOH-SCRIPT2 with Windows

Using RICOH-SCRIPT2 with Windows 95/98

Installing the Printer Driver

For operation under Windows 95/98, you should install both the Windows 95/
98 PostScript printer driver and the PPD file.

Preparation

The following procedure describes installation when the printer is connected
to the computer via parallel interface.

Important

❒

The Windows 95/98 operating system CD-ROM or diskettes are required for
installation.

❒

Be sure to install the PPD file for Windows 95/98. Do not install the PPD file
for Windows NT4.0 accidently.

Close all applications that are currently running.

Click

[Start]

, point to

[Settings]

, and then click

[Printers]

The

[Printers]

window opens.

Double-click the

[Add Printers]

icon.

The

[Add Printer Wizard]

starts up.

Click

[Next]

Check

[Local printer]

, and click

[Next]

A dialog for selecting the printer manufacturer and model name appears.

Click

[Have Disk]

A dialog for installing a driver from a disk appears.

Insert the CD-ROM that comes with the printer into your computer's CD-
ROM drive.

Click

[Browse]

Note

❒

The Windows 95/98 printer driver is on the following folder on the CD-
ROM: \DRIVERS\RPS2\WIN95_98\(language)

Use the

[Drives:]

list box to select the CD-ROM drive.

In the

[Folders]

box, double-click

[DRIVERS]

[RPS2]

, and then

[WIN95_98]

Then double-click the folder of the appropriate language. Finally, click

[OK]

Содержание AP204













































































































































































































































































































Результаты поиска

Содержание AP204

Отзывы:

Ricoh AP204, Руководство оператора, Страница: 253 / 301

Результаты поиска

Содержание AP204

Отзывы: