Ricoh AP204, Руководство оператора

Страница: 289 / 301

Appendix
48
4
Note
❒
If you cannot solve the problem by taking the above actions, contact your
sales or service representative.
OS Status Possible Causes and Solutions
Win/Mac The following message
is printed when there is
not enough memory in
the printer to perform
printing.
“There is not enough
memory in your print-
er to print this page.
Change the resolution
to 300 dpi in the printer
driver and try again.
For details, please refer
to the troubleshooting
section in your manu-
al.”
An error message is frequently printed.
❖ ❖ ❖ ❖
Increase memory.
Install an optional memory unit (SIMM).
❖
❖ ❖
❖
Turn on “Image Memory”.
Turning on the “Image Memory” can cause
printing to take a long time. See the print-
er's “Operating Instructions” that comes
with your printer for details on the “Image
Memory”.
An error message is occasionally printed.
❖ ❖ ❖ ❖
Increase memory.
Install an optional memory unit (SIMM).
❖ ❖ ❖ ❖
Reduce the resolution.
• Windows 95/98
On the [Graphic] tab, change the resolu-
tion setting to [300 dpi] .
⇒
P.16 “ [Graph-
ics] Tab”
• Windows NT4.0
On the [Advanced] tab, change the [Reso-
lution]
setting to
[300 dpi]
.
⇒
P.26 “ [Ad-
vanced] Tab”
• Macintosh
LaserWriter 8.3x or earlier
On the [Print Options] dialog, change the
[Resolution] setting to [300 dpi] .
⇒
P.39
“LaserWriter 8.3x or Earlier”
LaserWriter 8.4x or later
In the
[Printer Specific Options]
of the
[Print] dialog, change the [Resolution] set-
ting to
[300 dpi]
.