Ricoh AP204, Руководство оператора, Страница: 225 / 301

Appendix
82
6
TCP/IP
❖ ❖ ❖ ❖
When the address is configured
❖ ❖ ❖ ❖
When using lpr
At the beginning of the message, the IP address of the client is displayed with-
in parentheses.
No local target for “print server name” Cannot get routing information on the file
server. If a different frame type is config-
ured from that used on the network, you
should select "Auto Select" as a frame
type.
Required file server (“file server name”)
not found Cannot find the required file server.
Required print server (“print server
name”) not found Cannot find the print server. Confirm the
name of the print server.
Unable to attach to print server (“print
server name”) Cannot attach to the print server. The
print server refuses a connection for some
reason. Confirm the configuration of the
print server.
Invalid gateway address The Gateway address is not correct for the
specified IP address.
filter data error Some data cannot be handled by the filter
option. Confirm the file code and the set-
tings of the filter option.
lost connection The connection was cut by a counterpart.
Check the printer to which you requested
to print.
print requests full Cannot accept the print request.(max. 5
sessions) Confirm the status of the printer
with lpq, rsh, rcp, and ftp commands, and
print it again after the print request be-
comes less than 5 sessions.
printer permission denied Cannot get permission to use the printer.
Confirm the access rights with the access
control address and the access control
mask.
printer refuse Something is wrong with your printer.
Confirm the status of the printer.