Ricoh AP204, Руководство оператора

Страница: 186 / 301

Setting Up a Client Computer
43
3
K
Click the [Printer Settings] tab.
L
Remove the
''''
marks from the [Form feed] and the [Enable banner] check box-
es.
Note
❒
You should not check these boxes here, since they should be specified us-
ing the printer driver. If they are checked, the printer might not print cor-
rectly.
When Using the PostScript Printer Driver
Follow these steps to set up for the PostScript Printer Driver
A
Click the
[PostScript]
tab.
B
Click
[Advanced]
.
C
Remove the
''''
marks from the [Send CTRL+D before job] and the [Send
CTRL+D after job]
check boxes.
M
Click [OK] to close the property.
Windows 3.1x
Follow these steps to setting up a Windows 3.1x client.
A
Install the printer driver of the printer you want to use as “Local printer”.
Reference
For more information on installing the printer driver, refer to the Operat-
ing Instructions of your printer.
B
Double-click the [Printers] icon of [Control Panel] .
C
In the [Installed Printers] box, select the printer driver you want to use by
clicking it, and then, click [Connect] .
D
In the
[Ports]
box, click
[LPT1]
to highlight it, and click
[Network]
.
The Network driver dialog appears.
E
In the [Ports] box, click [LPT1] to highlight it, and in the [Resources] box, click
the queue you want to print to highlight it.
Note
❒
You should log in to the print server in order to see the print queues.
F
Click [Capture] .
The specified queue is captured to the LPT1.