Ricoh AP204, Руководство оператора

Страница: 46 / 301

Setting Up the Printer for Network with the Operation Panel
27
3
H
If you use NetWare, select the frame type for NetWare. Select one of items
below if necessary.
• Auto Select (Default)
• Ethernet 802.3
• Ethernet 802.2
• Ethernet2
• Ethernet SNAP
Note
❐
Usually, use the default setting (“Auto Select”). However if you select “Auto
Select”, the frame type detected by the printer first is adopted. If your net-
work can use more than two frame types, the printer fails to select the cor-
rect frame type, if the “Auto Select” is selected. In this case, select the ap-
propriate frame type.
1 Press
{U} {T} {U} {T} {U} {T} {U} {T} {U} {T}
until the following message appears.
<System Menu>
U
38. Frame NW
2 Press
{ {
{ {
{
Enter
} }
} }
}
.
The current setting appears on the panel display.
<Frame NW>
U
*Auto Select
T
3 Press
{U} {T} {U} {T}
{U} {T} {U} {T}
{U} {T}
until the frame type you want to use appears.
4 Press
{ { { { {
Enter
} } } } }
.
You have completed the printer’s network settings.
5 Press
{ { { { {
On Line
} } } } }
.
This returns to the normal display screen.
I
Print the configuration page to check settings you have made.
1 Press
{ {
{ {
{
Menu
} }
} }
}
.
2
Press
{U} {T} {U} {T} {U} {T} {U} {T} {U} {T}
, until the following message appears.
<Menu>
U
List Print
T
3 Press
{ {
{ {
{
Enter
} }
} }
}
.
4
Check if the following message appears. If not, press
{U} {T} {U} {T} {U} {T} {U} {T} {U} {T}
until the
following message appears.
<List Print>
U
Config.Page
T
5 Press
{ {
{ {
{
Enter
} }
} }
}
.
The following message appears.
<Config.Page>
U
Press # key
T