Ricoh AP204, Руководство оператора

Страница: 194 / 301

Installing with the Installation Shell Script
51
5
❒
If the host name of the printer has already been configured, input nothing
and press
{
Return
}
. Nothing is added to the /etc/hosts file.
F
Input the host name of a printer.
Enter Printer host name :
pomelo
Note
❒
The host name is added to the /etc/hosts file.
⇒
P.52 “Adding the IP Ad-
dress and Host Name to the /etc/hosts File”
❒
If the IP address entered with procedure
E
, nothing is added to the /etc/
hosts file.
G
Configure the printer name.
It is configured as the name appearing in “default” when you press
{
Return
}
.
If you want to change this name, input a new name.
Note
❒
The printer name is added to the /etc/printcap file.
⇒
P.52 “Adding an En-
try to the /etc/printcap file.”
❒
The host name that was saved in step
F
followed by “_prn” appears in “de-
fault”. If no host name is entered with procedure
F
, “ricoh_prn” is dis-
played.
H
To set the print option, input “filetype=RPS”, because you must use Post-
Script when printing from a UNIX workstation.
Enter remote printer name [default filetype=P01]:
filetype=RPS
hosts file is modified
#
Note
❒
“filetype=RPS” can be shortened to “fil=RPS”.
❒
Use “filetype_RPS” or “fil_RPS” when using Solaris 2.6. in place of “file-
type=RPS”.
Setup with installation shell script is finished.
Note
❒
Print option is writen in “rp” capability of /etc/printcap file(
⇒
P.52). This
option is used when you print by lpr.
I
Make a test print to confirm that the settings are correct.
# lpr -Ppomelo_prn file_name