manualshive.com logo in svg

Ricoh AP204, Руководство оператора, Страница: 236 / 301

Поделиться
Скачать
Ricoh AP204 Скачать руководство пользователя страница 236

Introduction

Please read the Safety Information in the “Operating Instructions” that comes with the printer before
using this machine. It contains important information related to USER SAFETY and PREVENTING
EQUIPMENT PROBLEMS.

Important

Parts of this manual are subject to change without prior notice. In no event will the company be liable
for direct, indirect, special, incidental, or consequential damages as a result of handling or operating
the machine.

Trademarks

Microsoft

®

, Windows

®

, and MS-DOS

®

 are registered trademarks of Microsoft Corporation in the United

States and/or other countries.

PostScript

®

 is a registered trademark of Adobe System Incorporated.

AppleTalk, Apple, Macintosh, TrueType, LaserWriter are registered trademarks of Apple Computer, In-
corporated.

Other product names used herein are for identification purposes only and might be trademarks of their
respective companies. We disclaim any and all rights in those marks.

Note

The proper names of Windows operating system are as follows:

•

Microsoft

®

 Windows

®

 95 operating system

•

Microsoft

®

 Windows

®

 98 operating system

•

Microsoft

®

 Windows NT

®

 Server network operating system Version 4.0

•

Microsoft

®

 Windows NT

®

 Workstation operating system Version 4.0

Содержание AP204














































































































































































































































































































Отзывы:

Нет отзывов