Ricoh AP204, Руководство оператора

Страница: 79 / 301

Troubleshooting
60
6
Message
94: Error
Description
The amount of the memory
is not set correctly.
Comments
Specify the correct memory capacity
using the printer driver. => P.36, 40, or
44 “Setting Up Options”
Note
❐
If you cannot solve the problem by taking above actions, turn the printer power
off and then back on again. If this does not clear the error message, write down
the error number and the message, and contact your sales or service represen-
tative.
Getting Printer Information over the Network
Note
❐
The optional network interface board is required to get the information over
the network.
Printer Current Status
You can check the printer’s current status using the following method.
❖
UNIX
Use the lpq command or stat parameter of rsh, rcp, or ftp.
For more information, => “Operating Instructions” of the optional network
interface board.
❖
mshell
Use status command.
For more information, => “Operating Instructions” of the optional network
interface board.
Status
Normal
Add Fuser Oil
Add Toner: All
Add Toner: Black
Add Toner: Cyan
Description
Printer works properly.
The fuser oil bottle is
empty.
All toner (black, cyan,
magenta, and yellow) has
run out.
Black toner has run out.
Cyan toner has run out.
Comments
—
Replace the fuser oil bottle.
=> P.87 “Replacing the Fuser Oil Bottle
and Ozone Filter”
Replace the toner cartridge.
=> P.86 “Replace the Toner Cartridge”
Replace the black toner cartridge.
=> P.80 “Replace the Toner Cartridge”
Replace the cyan toner cartridge.
=> P.80 “Replace the Toner Cartridge”