Ricoh AP204 Скачать руководство пользователя страница 255

Страница: 255 / 301

Using RICOH-SCRIPT2 with Windows

In the

[Installable options]

box, select the option you have installed to your

printer.

The current setting is displayed in the

[Change settings for:]

list box.

Note

❒

The following items are available here:

[Option Tray]

[VMOption]

Use the

[Change settings for:]

list box to select the appropriate setting for the

selected option.

Click

[Apply]

to apply the settings you made.

After making all settings you want, click

[OK]

to close the Printer Properties

dialog.

Reference

You can confirm that the options are properly set by printing a configura-
tion page.

⇒

P.55

“Printing the Configuration Page”

Accessing the Printer Properties

There are two methods you can use to open the Printer Properties.

Making the Printer Default Settings

To make the printer default settings for printing from applications, open the
Printer Properties dialog from the

[Printers]

window.

Note

❒

The following tabs are standard Windows tabs. For more information on
these tabs, see the documentation that comes with your Windows operating
system.
•

Windows 95:

[General]

[Details]

, and

[Sharing]

•

Windows 98:

[General]

[Details]

[Sharing]

, and

[Color Management]

❒

Profiles set in the

[Color Management]

tab are not supported.

Click

[Start]

, point to

[Settings]

, and then click

[Printers]

The

[Printers]

window opens.

Select the icon of the printer you want to use by clicking it. On the

[File]

menu, click

[Properties]

The Printer Properties dialog appears.

Содержание AP204













































































































































































































































































































Результаты поиска

Содержание AP204

Отзывы:

Ricoh AP204, Руководство оператора, Страница: 255 / 301

Результаты поиска

Содержание AP204

Отзывы: