Ricoh AP204, Руководство оператора, Страница: 80 / 301

Error & Status Messages
61
6
Status
Add Toner:
K,M,Y,C*
Add Toner: Ma-
genta
Add Toner: Yellow
Call Service
Change 120K
Change Fuser
Cleaner
Change Fusing
Unit
Change PCU
Close Front Cover
Close Rear Cover
Close Top Cover
Energy Save Mode
Fuser Oil is Low
Load Paper
Misfeed: Output
Tray
Misfeed: Paper
Tray
Misfeed: Rear
Cover
Description
Indicated toner has run
out.
* : K: black, M: magenta,
Y: yellow, and C: cyan
Magenta toner has run out.
Yellow toner has run out.
There is a malfunction in
the printer.
It is time for scheduled
maintenance.
The fuser cleaner is dirty.
The fuser cleaner is at the
end of its life.
The fusing unit is at the
end of its life.
The photoconductor unit is
nearly at the end of its life.
The front cover is open.
The rear cover is open.
The top cover is open.
The printer is in Energy
Saver mode.
Fuser oil is low.
There is no paper in the tray.
There is a paper misfeed in
the printer.
There is a paper misfeed in
the printer.
There is a paper misfeed in
the printer.
Comments
Replace the toner cartridges.
=> P.80 “Replace the Toner Cartridge”
Replace the magenta toner cartridge.
=> P.80 “Replace the Toner Cartridge”
Replace the yellow toner cartridge.
=> P.80 “Replace the Toner Cartridge”
Turn the printer off and on. If this
doesn’t clear the problem, contact your
sales or service representative.
Contact your sales or service represen-
tative.
The fuser cleaner is dirty. It should be
changed soon.
Replace the fuser cleaner. => P.89 “Re-
placing the Fuser Cleaner”
Contact your sales or service represen-
tative.
=> P.82 “Replacing the Photoconductor
Unit”
Close the front cover.
Close the rear cover.
Close the top cover.
Wait for a while.
Prepare a new fuser oil bottle for re-
placement. You can print about 30 pages
or more after this message appears.
=> P.87 “Replacing the Fuser Oil Bottle
and Ozone Filter”
Load paper. => P.51 “Loading Paper”
Remove the misfed paper.
=> P.71 “Removing Misfed Paper”
Remove the misfed paper.
=> P.71 “Removing Misfed Paper”
Remove the misfed paper.
=> P.71 “Removing Misfed Paper”