Ricoh A095, Руководство по обслуживанию

Страница: 659 / 680

8)',2-'%0#7)6:-')#&900)8-2
&900)8-2#291&)6 U #### JJHIfJJIIfJJJI # g # NKE NJfEGfMK
%440-'%&0)#13()0 U # *8 JJHIfJJIIfJJJI
SUBJECT: PARTS CATALOG UPDATES
••••
UPDATE NO. 1 -
PLATEN COVER HARNESS - To facilitate assembly, the function of the Platen
Cover Harness has been combined with the Outer Optics Harness.
REFERENCE
OLD PART NO. NEW PART NO. DESCRIPTION QTY INT PAGE ITEM
A0965474 Platen Cover Harness 1 - 0
1
23 30
A0975473 Outer Optics Harness 1 - 0 23 31
A1755473 Outer Optics Harness 0 - 1 23 31
UNITS AFFECTED:
Not available at time of publication.
••••
UPDATE NO. 2 -
SEPARATION ROLLER STAY - Due to parts standardization, the following parts
have been changed.
NOTE: Since the location of the position sensor bracket on which the separation roller stay is installed has
been moved 5 mm towards the rear, the 3 parts listed below must be replaced at the same time.
Also, the old parts will no longer be available.
REFERENCE
OLD PART NO. NEW PART NO. DESCRIPTION QTY INT PAGE ITEM
A0966303 A1766303 Separation Roller Stay 3 - 3 3/S 39 44
A0966338 A1766338 Separation Guide 3 - 3 3/S 39 22
A0966337 A1766337 Paper Feed guide 3 - 3 3/S 39 14
UNITS AFFECTED:
Not available at time of publication.
INTERCHANGEABILITY CHART:
0
OLD and NEW parts can be used in both OLD and
NEW machines.
2
NEW parts CAN NOT be used in OLD machines.
OLD parts can be used in OLD and NEW machines.
1
NEW parts can be used in OLD and NEW machines.
OLD parts CAN NOT be used in NEW machines.
3
OLD parts CAN NOT be used in NEW machines.
NEW parts CAN NOT be used in OLD machines.
3/S
Must be installed as a set on units manufactured prior to the S/N cut-in. On units manufactured after the S/N cut-in or
previously modified, use the new part numbers individually.
Continued...
'97831)6#7)6:-')#+6394
‰
ME
CHANICAL
‰
PA
P
E
R
PA
T
H
‰
ELEC
TR
IC
A
L
‰
OTHER
Note:
This copy intended as master of original
for reproduction of additional bulletins.
‰
F S M
‰
COP
Y
QUALITY
„
P
ARTS