Ricoh A095, Руководство по обслуживанию

Страница: 611 / 680

Tech Service Bulletin No. 6645/6655/6665 - 044
Page 2 of 2
••
UPDATE NO. 2 -
RELEASE ARM - The material of the Release Arm has been changed from
aluminum to iron to prevent it from becoming deformed. This will prevent the poor
image transfer associated with a bent Release Arm.
REFERENCE
OLD PART NO. NEW PART NO. DESCRIPTION QTY INT PAGE ITEM
A0963658 A0963959 Relase Arm 1 1 1 99 19
UNITS AFFECTED:
Not available at time of publication.
••
UPDATE NO. 3 -
LEFT SCALE - With use, the Left Scale may warp slightly. This may allow
originals to go between the Left Scale and the Exposure Glass when they are
switched back. As a countermeasure, the material of the Left Scale has been
changed from ABS to Polycarbonate and the grooves on the back side have
been removed.
REFERENCE
OLD PART NO. NEW PART NO. DESCRIPTION QTY INT PAGE ITEM
A0961904 A0971736 Left Scale - LT 1 1 1 19 1
A0961901 A0971731 Left Scale - A4 1 1 1 19 1
UNITS AFFECTED:
Not available at time of publication.
••
UPDATE NO. 4 -
BELT UNIT KNOB - If the Belt Unit
Knob is rotated excessively when
releasing the Belt Unit, the knob may
break at the flat portion of the
aluminum insert. To prevent this, the
flat area has been modified as
shown to the right.
REFERENCE
OLD PART NO. NEW PART NO. DESCRIPTION QTY INT PAGE ITEM
A0963961 A0963960 Belt Unit Knob 1 1 0 99 16
UNITS AFFECTED:
Not available at time of publication.
(Back side view)
Grooves
Old
New
Aluminum Insert
1.0
→
2.5mm
View at A
A