Ricoh A095, Руководство по обслуживанию

Страница: 114 / 680

Input
No
Sensor/Switch/|Signal Status
0 1
1 Registration Sensor Paper not detected Paper detected
2 Fusing Exit Sensor Paper not detected Paper detected
3 Exit Sensor Paper not detected Paper detected
4 Vertical Transport Sensor Paper not detected Paper detected
5 1st Tray Set Switch (A095 only) Not set Set
6 By-Pass Paper End Sensor Paper detected Paper not detected
7 2nd Paper End Paper detected Paper not detected
8 3rd Paper End Paper detected Paper not detected
9 Built-in LCT Tray Down Key Pressed Not pressed
10 2nd Paper Near End Sensor Not near end Near end
11 3rd Paper Near End Sensor Not near end Near end
12 Built-in LCT Paper Set Paper detected Paper not detected
13 2nd Paper Size Switch (All SW) Set Not Set
14 2nd Tray Set Detection Not set Set
15 3rd Tray Set Switch (A095 only) Not set Set
16 Built-in LCT Set Detection Not set Set
17 1st Paper Feed Sensor Paper not detected Paper detected
18 2nd Paper Feed Sensor Paper not detected Paper detected
19 3rd Paper Feed Sensor Paper not detected Paper detected
20 Not Used — —
21 2nd Lift Sensor Not lifted Lifted
22 3rd Lift Sensor Not lifted Lifted
23 Built-in LCT Tray Down Sensor Tray at down Tray not down
24 Fusing Set Detection. Not set Set
25 Drum Unit Set Detection Not set Set
26 Right Tandem Paper End Sensor Paper detected Paper not detected
27 Left Tandem Paper End Sensor Paper detected Paper not detected
28 Right Tandem Tray Set Detection Not set Set
29 Left Tandem Tray Set Detection Not set Set
30 Rear Fence Return Sensor Not at return position At return position
31 Rear Fence HP. Sensor Not at HP At HP
32 Base Plate Down Sensor (Tandem) Not down Down
33 1st Paper Near End Sensor Not at near end Near end
34 1st Lift Sensor Not lifted Lifted
35 Side Fence HP. Sensor At HP Not at HP
36 3.5 K LCT Paper End Sensor Paper detected Paper not detected
37 3.5 K LCT Set Detection Not set Set
Rev. 10/94
S
e
rvice T
a
b
les
FSM 4-37 A095/A096/A097