Ricoh A095, Руководство по обслуживанию

Страница: 429 / 680

5.4 DIP SWITCH TABLE
Factory Setting
DIP SW 2 DIP SW 1
1 2 3 4 1 2 3 4
0 0 0 0 0 0 0 0
After performing the following tests, these DIP switches should be returned
to the factory settings.
Motor Test
DIP SW 2 DIP SW 1
Description Note
1 2 3 4 1 2 3 4
1 1 0 1
1 0 0 0 Feed-in Motor 1
0 1 0 0 Transport Belt Motor
0 0 1 0 Inverter Motor
0 0 0 1 Feed-out Motor 2
Note 1: When these DIP SW combinations are set. The motors start
rotating. While SW 3 is held down. The motor rotates in the reverse
direction.
Note 2: When these DIP SW combinations are set, the motors start rotating.
While SW 3 is held down, the motor rotates slowly.
Paper Feed
DIP SW 2 DIP SW 1
Description
1 2 3 4 1 2 3 4
0 1 0 1
0 0 0 0
Feeds a sheet of paper
(Scale Registration)
0 1 0 0
Feeds a sheet of paper
(Timing Registration)
Note: With these DIP SW combinations, press SW 3 to feed a sheet of
paper. Press SW 3 again to reverse the paper feed direction, then
press SW 3 to feed out the sheet.
A095/A096/A097 9-10 FSM