manualshive.com logo in svg

Ricoh A095, Руководство по обслуживанию

Поделиться
Скачать
Ricoh A095 Скачать руководство пользователя страница 562

BULLETIN NUMBER:      6645/6655/6665-024 

09/30/94

APPLICABLE MODEL: FT6645/6655/6665

SUBJECT: FIELD SERVICE MANUAL - INSERT

GENERAL:

The Field Service Manual page(s) listed below must be replaced with the page(s) supplied.  Each bulletin
package contains 2 sets of replacement pages.

PAGES:

The revised areas have been highlighted by an arrow  

⇒

•

4-35

Updated Information

  
  Please replace Technical Service Bulletin No. 6645/6655-023 dated 08/02/94
  with this bulletin. An error in sequencing was made during distribution of the
  last bulletin package (Control #192) resulting in the existence of two (2)
  consecutive 6645/6655-023 bulletins. Discard the 6645/6655-023 bulletin
  dated 

08/02/94

 and retain the 6645/6655-023 bulletin dated 

07/11/94

.

  NOTE:  Since the updated Field Service Manual page (4-35 dated 08/02/94)
               is not affected by this bulletin number correction, it is not being
              distributed for a second time. 

Содержание A095









































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды