Ricoh A095, Руководство по обслуживанию

Страница: 297 / 680

Rev. 6/13/97
FSM A095/A096/A097 5-138
A095/A096/A097 - Service Tips: Duplex feed
)LJXUH
2QH :D\
%XVKLQJ
$$
;;PP
)LJXUH
2QH :D\
%XVKLQJ
$$
;;PP
Figure 3.
One Way Gear
(AB013802) 35Z
Figure 6.
Separation
Clutch
(AX200092)
Figure 4.
Lever Exit Guide
(A0964891)
Figure 5.
Jogger Span
Adjustment
SP adj.
Pg. 11
Figure 7.
Gear
(AB010089
•
One way bushings and bearings: Figures 1, 2 and 3 are the 3 one way
bushings\bearings that are located in the duplex feed system. All can cause
problems feeding out of Duplex.
•
Lever exit guide: Figure 4. Can become warped, causing jams in the Duplex
exit area. Reform or replace as necessary.
•
Jogger Span Adjustment: Figure 5. Is the most common cause of Duplex
feed out jams. Feed a sheet of paper into the duplex unit. Pull out Duplex Unit.
Confirm that the Jogger Fences are 1mm wider than the paper in the Duplex
Tray.
Confirm this for each paper size
•
Duplex Separation Clutch: Figure 6. Duplex separation Clutch may be slippin
binding. Clean or replace as necessary.
•
Separation drive gear: Figure 7. We have seen one case of this gear
developing a (difficult to see) hairline crack. The gear would separate during a
long run, resulting in an intermittent Duplex feed out jam.