Revere Coastal Commander 2.0, Руководство по обслуживанию

Страница: 47 / 170

October 7, 2016
9120
Disassembly
3 - 7
4. For Commander rafts, untie the mooring line from inside the vacuum bag
5. Untie survival equipment pack, and place it aside for further inspection. (See Chapter 6,
Inspection and Chapter 8, Assembly for further instructions on the equipment packs)
6. Unfold it and lay it out flat with canopy on the top.
7. Using a wrench, disconnect the cylinder inflation valve from both valve inlet checks. Ensure that
the inflation valve pull cable does not become caught on any projections as this may cause the
liferaft to inflate and cause possible injuries. Un-strap the cylinder holder on the buoyancy tube
and remove the cylinder.
8. Once the cylinder is disconnected from the raft, screw diffuser caps to outlets.
Warning: The charged gas cylinder can become a lethal projectile if discharged to
atmosphere when not fitted with a cap. Always fit a diffuser cap to a
cylinder valve outlet when handling a fully charged cylinder.
Warning: Do not attempt to dismantle the CO
2
cylinder until it has been completely
discharged.
10. Securely place cylinder to side for testing. (See Chapter 4 Testing)
11. Remove other items of equipment if necessary.