Revere Coastal Commander 2.0, Руководство по обслуживанию

Страница: 46 / 170

October 7, 2016
3 - 6
Disassembly
9120
FIGURE 1 – CUTTING CONTAINER STRAPS
Valise
Carefully pull open the Velcro fasteners on the valise. Remove the looped painterline from around
the painterline patch on the valise.
For Cruiser rafts, carefully untie the painterline and pass the end of the painterline back through
the inflation valve pull cable loop.
For Commander rafts, untie the painterline from the outside loop patch on the vacuum bag and
carefully untie the painterline from vacuum clip. After everything has been disconnected and
place it to the side.
Warning: Although the painterline is now disconnected from the inflation system,
the inflation system is still charged and armed. Maintain caution while
handling any part of the inflation system, with special attention to the
inflation valve pull cable.
3. Carefully lift the liferaft out of the valise/container, lay it on a prepared working area.
For Commander rafts, disconnect vacuum clip from around inflation cable ball, making sure not to
pull on the inflation valve toggle pull cable in the process. DO NOT REUSE VACUUM PACK
DURING REPACK.