Reson SeaBat 8160, Руководство оператора

Страница: 24 / 129

SAFETY PRECAUTIONS
SeaBat 8160
Operator‟s Manual
Page 14 October 6, 2011
Version 5

Acids

Automotive brake fluid

Base

Grease

Halogenated hydrocarbons
(carbon tetrachloride,
trichloroethylene)

Hydraulic fluids

Ketones (MEK, acetone)

Nitro hydrocarbons
(nitrobenzene, aniline)

Oil

Ozone

Petrol

Phosphate ester
The following recommendations are made to protect the arrays while in use and
in storage.

For cleaning, use a mild, nonabrasive soap, fresh lukewarm water, and
a soft brush.

Rinse the sonar with fresh water after every use.

Do not clean the array or sonar by using hot or cold pressure washers.
The high-velocity water spray will cut through the polyurethane or
damage the interface between the polyurethane and the sonar metal
housing.

To scrape away marine growth from the arrays, use only a wooden tool.

Do not apply any antifouling paint on the acoustic window unless the
type is recommended by RESON. The antifouling paint will affect the
acoustic performance. RESON recommends:
o
For high-frequency transducers (>100kHz) use International VC
17m.
o
For low-frequency transducers (<100kHz) use SigmaGlide.
NOTE
As these products are subject to technical modifications, it is
recommended that the most up to date PDS
1
and MSDS
2
are
acquired prior to commencing the coating work.
1
Product Data Sheet
2
Material Safety Data Sheet