Reson SeaBat 8160 Скачать руководство пользователя страница 36

Страница: 36 / 129

SYSTEM OPERATION

SeaBat 8160

Operator‟s Manual

Page 26

October 6, 2011

Version 5

5.3.4 Menu Functions

The Menu Block (see

Figure 13

) is the primary control point for the SeaBat 8160

system. To modify items on this menu or on any sub-menus, place the mouse
pointer over the item to be modified. A box will appear around the title and value.
To change the value:



Click the right mouse button to increase the value.



Click the left mouse button to decrease the value.



Hold the center mouse button while clicking the left or right mouse
button to increase or decrease values at a faster rate.

NOTE

There are five separate menus that may be found in the Menu Block. Those
are: Main, Ocean, Display, Filters, and Off.

5.3.5 Activate the BITE Display

The SeaBat 8160

includes a Built-In Test Environment (BITE) display that shows

diagnostic and configuration information about the current sonar session. The
BITE button (see

Figure 13

) will always be one of three colors:



Green

indicates normal operation.



Yellow

indicates that some levels are out of compliance or improperly

calibrated, but the system is still in operation.



Red

indicates that the system has malfunctioned and is no longer

operational.

To diagnose problems or view status, activate the BITE display by clicking the
“BITE” button at the top left corner of the screen. (See

section 5.9 Built-In Test

Environment (BITE) Display

for more information on this function.)

Содержание SeaBat 8160


































































































































Результаты поиска

Содержание SeaBat 8160

Отзывы:

Похожие инструкции для SeaBat 8160

Бренды по названию

Популярные бренды

Reson SeaBat 8160, Руководство оператора

Результаты поиска

Содержание SeaBat 8160

Отзывы:

Похожие инструкции для SeaBat 8160

Бренды по названию

Популярные бренды