manualshive.com logo in svg

Renesas HD6417641, Руководство по оборудованию, Страница: 3 / 1036

Поделиться
Скачать
Renesas HD6417641 Скачать руководство пользователя страница 3

Rev. 4.00  Sep. 14, 2005  Page iii of l 

 

1. These materials are intended as a reference to assist our customers in the selection of the Renesas 

Technology Corp. product best suited to the customer's application; they do not convey any license 
under any intellectual property rights, or any other rights, belonging to Renesas Technology Corp. or 
a third party.

2. Renesas Technology Corp. assumes no responsibility for any damage, or infringement of any third-

party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or 
circuit application examples contained in these materials.

3. All information contained in these materials, including product data, diagrams, charts, programs and 

algorithms represents information on products at the time of publication of these materials, and are 
subject to change by Renesas Technology Corp. without notice due to product improvements or 
other reasons.  It is therefore recommended that customers contact Renesas Technology Corp. or 
an authorized Renesas Technology Corp. product distributor for the latest product information 
before purchasing a product listed herein. 
The information described here may contain technical inaccuracies or typographical errors. 
Renesas Technology Corp. assumes no responsibility for any damage, liability, or other loss rising 
from these inaccuracies or errors. 
Please also pay attention to information published by Renesas Technology Corp. by various means, 
including the Renesas Technology Corp. Semiconductor home page (http://www.renesas.com).

4. When using any or all of the information contained in these materials, including product data, 

diagrams, charts, programs, and algorithms, please be sure to evaluate all information as a total 
system before making a final decision on the applicability of the information and products.  Renesas 
Technology Corp. assumes no responsibility for any damage, liability or other loss resulting from the 
information contained herein.

5. Renesas Technology Corp. semiconductors are not designed or manufactured for use in a device or 

system that is used under circumstances in which human life is potentially at stake.  Please contact 
Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor when 
considering the use of a product contained herein for any specific purposes, such as apparatus or 
systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use.

6. The prior written approval of Renesas Technology Corp. is necessary to reprint or reproduce in 

whole or in part these materials.

7. If these products or technologies are subject to the Japanese export control restrictions, they must 

be exported under a license from the Japanese government and cannot be imported into a country 
other than the approved destination. 
Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the 
country of destination is prohibited.

8. Please contact Renesas Technology Corp. for further details on these materials or the products 

contained therein.

1. Renesas Technology Corp. puts the maximum effort into making semiconductor products better and 

more reliable, but there is always the possibility that trouble may occur with them. Trouble with 
semiconductors may lead to personal injury, fire or property damage. 
Remember to give due consideration to safety when making your circuit designs, with appropriate 
measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or 
(iii) prevention against any malfunction or mishap.

Keep safety first in your circuit designs! 

Notes regarding these materials

 

 

Содержание HD6417641













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов