Regal 42 Fly-Grande Coupe, Руководство пользователя

Страница: 172 / 386

13
Engine & Controls
Using Joystick Control High Mode Function
Sometimes a strong wind or current will need to be off -
set by engaging the high mode function at the joystick
control. Once activated the engine idle will increase.
Th is feature can be especially useful when trying to
dock or maneuver in tight areas.
To use the High Mode Function;
1. Activate the high mode by pressing button (B) on the
joystick (see the illustration).
2. You will hear an audible signal indicating the docking
mode is activated and the docking lamp above the high
mode button will light (see illustration).
3. At this point the vessel can be maneuvered by moving
the joystick fore and aft , sideways, or rotating the vessel
by twisting the joystick top. See the illustration on the
following page.
4. Leave the high mode function by pressing button (B).
An audible signal will sound twice to confi rm that the
high mode function is deactivated and the light will go
out.
5. Th e system is now in normal docking mode not con-
nected to the joystick control.
TYPICAL
JOYSTICK CONTROL
Using Joystick Control Docking Mode Function
When using the joystick for docking the engine rpm
scale is limited and the boat can only be steered with
the joystick.
For the docking mode to be activated the engines must
be running, the remote control levers must be in the
neutral position, with an active helm station, and the
joystick handle must be centered.
First, activate the docking mode on the joystick by de-
pressing the “docking” button (A). You will hear an
audible signal confi rming the docking function is ac-
tivated along with a button lamp being energized. Th
e
joystick is now the control for docking and low speed
maneuvering.
Next, to deactivate the docking mode depress the dock-
ing button on the joystick. Again, an audible signal will
sound twice to confi rm that the joystick docking mode
is now deactivated and the docking button light will go
out.
Note: If the remote controls are moved from the neutral
position the docking function will deactivate.