Regal 42 Fly-Grande Coupe, Руководство пользователя

Страница: 169 / 386

10
Chapter 5
I t is important that you read the Volvo operator’s
manual (IPS) carefully and become completely familiar
with the operation as well as required maintenance
procedures on the engines and related IPS propulsion
systems.
IPS ENGINES
BEFORE STARTING ENGINES
Before starting the engines check the guidelines below:
1.O pen the engine hatch and sniff for fuel smells and
visually check for fuel leaks. If diesel fuel is sensed or
leaks seen be sure to determine the cause and repair the
source before starting the engines. If you can not locate a
diesel fuel leak contact a marine professional immediately
or your closest Regal yacht dealer.
2. Remove any loose canvas and store in a dry location.
3. Shut and secure all hatches and doors.
4. Remove any debris from the engine water strainers
before turning on the seacock handle.
5. Ensure both engine seacocks are in the “open” posi-
tion. In the open position the handle is in line with the
incoming hose not perpendicular to it. In addition, open
the IPS stern drive sea cocks.
6. Make sure the swim ladder is secured in its folded
position and that the cover is in place.
7. Check fuel supply levels. Use the fuel “1/3” rule.
8. Turn all battery switches to the “on”position at the
battery management panel.
9. Activate the VHF and listen for the latest weather
conditions.
10. Activate the plotter and radar checking their func-
tions.
11. Make sure all passengers are accounted for, seated
and their life jackets are properly fi tted.
12. Check for a balanced load.
13. Before disembarking make sure a person is aboard
who knows how to operate the vessel and is trained in
emergency procedures in case the captain would not be
able to carry out his duties.
14. Inspect the engine and drive oil levels. Add specifi ed
oil as required.
15. Check engine coolant levels. Add specifi ed coolant
as required.
AFTER STARTING ENGINES
1. Allow the engines to idle for a short period as they
warm up. Never race a cold engine!
2.Check gauges for proper operation. Pay particular
attention to volts, oil pressure and temperature display
panel functions as they are key indicators of a proper
performing engine. Also, check that no alarms are dis-
played and no warning lights are fl ashing.
3. Open the engine compartment and listen to each en-
gine for unusual sounds.
4. Inspect the fuel, exhaust, and engine circulation system
for leaks.
5. Visually check the entire sump (bilge) for any unusual
conditions.
6. Visually check the through hull fi ttings for the proper
water output from components such the air conditioner
pumps and generator.