Regal 42 Fly-Grande Coupe, Руководство пользователя

Страница: 133 / 386

80
Chapter 4
Typical Dockside Pump-Out
Th ere is a fi tting located on the
deck labeled “waste.” Th is fi tting is
used to pump out the waste tank.
Normally a pump out station ser-
vice is available at most marinas.
Aft er removing the fi tting cover a special hose is insert-
ed into the fi tting and the machine then removes the
waste. Normally there is a charge for the service. Make
sure they connect the hose to the “waste” fi tting. Of
course when cruising in international waters the over-
board discharge pump may be used. See the section on
using the macerator.
Th ere is a waste fi lter installed in the vent line between
the waste tank and a thru-hull fi tting. Th e fi lter’s pur-
pose is to keep objectionable odors to a minimum from
the waste tank. It is recommended that the fi lter be
changed yearly. It can be ordered from your Regal yacht
dealer or from marine supply stores. Typically the waste
fi lter is mounted in the sump (engine compartment).
Note that the fi lter exits through a transom fi tting near
the starboard swim platform area.
One union fi tting on each end make it easier to change
out the fi lter.