Raritan TMCAT17 series, Руководство пользователя

Страница: 100 / 110

Appendix D: Two-Tier System
93
4. If you do not find the channel on the current page, press Page Down
or Page Up to go to the next or previous page.
5. Press or to highlight the channel where a second-tier MCCAT
switch is connected, and press G. The Channel Configuration
submenu of the selected second-tier device appears.
6. Now you can change the channel settings of the second-tier device.

To change the channel names, see Assigning or Modifying
Channel Names (on page 43).

To change the scan rates, see Changing the Scan Rate (on page
44).
7. Press S to save the changes or Esc to quit the current menu or
submenu.

If pressing S, then you can press Esc to return to the Channel
Configuration submenu of the base switch.

If pressing Esc, the message “Save the changes [Y/N/ESC]”
appears on the message bar. Press Y to save the changes, N to
abort the changes, or Esc to return to the current menu or
submenu.
Note: The second-tier channel names that you specify after logging in to
the base switch are saved in the database of the base switch, not on each
second-tier device. Therefore, these channel names are unavailable when
you access the second-tier device by using the keyboard and mouse
directly connected to it.
Accessing the Second-Tier Channels
The two-tier system automatically disables all front panel buttons on the
second-tier devices so the only method to access the second-tier
channels is the OSD. If you have properly established the two-tier system,
you should be able to see the second-tier channels on the base switch's
OSD.
To access the second-tier channels:
1. If you do not see the OSD on the screen, press the hot key twice
QUICKLY to activate it. The default hot key is Scroll Lock.
2. Press or to highlight the channel where the second-tier device is
connected. A channel connected to a second-tier device shows
dashes (- -) in the Scn column.
Tip: You can press the corresponding number shown in the No
column for that channel to quickly highlight it.
3. Press Enter. The Selection Menu lists the channels of the selected
second-tier device.