Chapter 6: LCD Panel Operation
62
4. Press or
to select the option, Yes, and then press
to
confirm.
A message "Auto Adjusting" is displayed on the screen, and the screen
flickers momentarily until it finds the ideal profile.
Resetting LCD OSD Settings
You can restore all of LCD OSD settings to factory defaults at any time.
To reset OSD settings:
1. Press . The LCD OSD menu appears.
2. Press or
to select the Misc submenu, and press
to
confirm.
3. Press or
to select the Reset field.
4. Press or
to select the option, Yes, and then press
to
confirm.
Important: You must press
in this step, or the reset function is not
performed.
5. Press twice to quit the LCD OSD menu.
If you change any LCD OSD settings after finishing Step 4, the later
changes are not reset.
Quitting the LCD OSD Menu
The LCD OSD menu automatically disappears if there is no activity from
the LCD control for the period of time specified in the "OSD Time" field
(usually 8 seconds by default). You can also manually exit from the LCD
OSD menu whenever you want.
To exit from the OSD manually:
Press
once or several times until the LCD OSD menu disappears.
Содержание TMCAT17 series
Страница 11: ...Chapter 1 Introduction 4 MCCAT UST Front and Rear View MCUTP20 PS2 Cable MCUTP20 USB or MCUTP20 SUSB Cable...
Страница 82: ...Appendix A Specifications 75 Screen resolution Refresh rate HZ 1280x1024 60 75 85 1600x1200 60...
Страница 109: ...Index 103 W What are Active and Inactive Channels 5 30 36...
