R&S NRX Series, Руководство пользователя

Страница: 484 / 514

Troubleshooting
R&S
®
NRX
484 User Manual 1178.5566.02 ─ 07
15.2.1 Interpreting the Errors and Error Codes
In the following, important error messages and their meaning are explained. For all
other errors, perform tests to find out whether it is a hardware or software problem, and
report the problem to the R&S
customer support. See Chapter 15.3, "Performing
Tests" , on page 487.
In remote control, errors are associated with error codes. Positive error codes are
instrument-dependent. Negative error codes are reserved by the SCPI standard. The
error types are grouped in number ranges. In the following description, both the error
code used in remote control and an error description is given to help identify the error.
15.2.1.1 System Errors
Number range of error codes: 1000 to 1999. Described errors:
1004 - firmware update error .......................................................................................484
1005 - settings conflict ................................................................................................ 484
1007 - target descriptor error ...................................................................................... 484
1008 - temperature alert ..............................................................................................484
1009 - fan failure alert ................................................................................................. 485
1004 - firmware update error
Firmware update failed.
Possible reasons:
●
You have used an
*.rsu
file that is not designated for the R&S NRX. The name of
a suitable
*.rsu
file starts with "NRX".
●
The firmware update was interrupted or otherwise faulty.
Solution: Perform the firmware update again. See Chapter 12, "Firmware Update" ,
on page 166.
1005 - settings conflict
Settings conflict of the R&S NRX occurred.
Reason: Contradictory settings are allowed so that you are not hampered in your work-
flow.
Solution: See Chapter 5.5, "Settings Conflict" , on page 47.
1007 - target descriptor error
Servicing required. You cannot resolve the problem yourself.
Solution: Contact customer support. See Chapter 15.5, "Contacting Customer Sup-
port" , on page 488.
1008 - temperature alert
R&S NRX is overheated. Overheating can damage the R&S NRX.
Possible reasons:
●
Insufficient airflow. Follow the instructions in "To place the R&S NRX on a bench
top" on page 18 or Chapter 3.1.5, "Mounting in a Rack" , on page 19.
Error Messages
www.allice.de Allice Messtechnik GmbH