R&S NRX Series, Руководство пользователя

Страница: 34 / 514

Operating Concepts
R&S
®
NRX
34 User Manual 1178.5566.02 ─ 07
The "Primary Sensor" dialog is displayed.
See
Chapter 8, "Sensor Configuration" , on page 113.
► Tap the displayed limit values , (2) in Figure 4-2 , to change limit values.
The "Limit Monitor" dialog is displayed.
See
"Limit Monitor" on page 56.
► Tap the displayed measurement value or graph , (3) in Figure 4-2 , to change the
measurement type, assign a sensor, access the sensor settings, ...
The "Measurement Settings" dialog is displayed.
See
Chapter 6.4, "Measurement Settings Dialog" , on page 66.
► Tap an element in the navigation pane , (4) in Figure 4-2 , to configure the trigger,
the presentation of the measurement result and further measurement-specific set-
tings.
See
Chapter 6, "Configuration for All Measurement Types" , on page 49.
Tapping other areas in the measurement pane can open further dialogs, but these dia-
logs are measurement-specific and there is no general rule that applies to all measure-
ments.
4.1.3 Status Information
The status information is displayed in the upper right corner, left from the notification
center. See
Figure 4-1 .
Table 4-1: Status symbols
Symbol Description Further information
Memory stick is connected and ready for use. Chapter 3.1.9, "Connecting USB and
External Devices"
, on page 23
Memory stick is connected and initialization is in pro-
gress. When the moving green dot vanishes, the
memory stick is ready for use.
Rem
R&S NRX is in remote control. Chapter 4.3.2, "Returning to Manual
Operation (LOCAL)"
, on page 42
LLO
LLO means local lockout.
R&S NRX is in remote control. Manual operation is
disabled.
Identification and initialization of a connected power
sensor is in progress.
Manual Operation
www.allice.de Allice Messtechnik GmbH