RAM Commercial ProMaster 2024, Руководство пользователя, Страница: 46 / 284

WARNING!
•
A loose head restraint thrown forward in a collision
or hard stop could cause serious injury or death to
occupants of the vehicle. Always securely stow
removed head restraints in a location outside the
occupant compartment.
•
ALL the head restraints MUST be reinstalled in the
vehicle to properly protect the occupants. Follow
the reinstallation instructions prior to operating the
vehicle or occupying a seat.
Rear Head Restraint Removal —
If Equipped
To remove the rear head restraints, push the release
button and adjustment button while pulling upward on
the whole assembly. To reinstall the headrest, put the
head restraint posts into the holes while pushing the
release button and adjustment button. Then adjust it to
the appropriate height.
NOTE:
WARNING!
•
A loose head restraint thrown forward in a collision
or hard stop could cause serious injury or death to
occupants of the vehicle. Always securely stow
removed head restraints in a location outside the
occupant compartment.
•
ALL the head restraints MUST be reinstalled in the
vehicle to properly protect the occupants. Follow
the reinstallation instructions prior to operating the
vehicle or occupying a seat.
UCONNECT VOICE RECOGNITION —
IF EQUIPPED
INTRODUCING VOICE
RECOGNITION
Start using Uconnect Voice Recognition with these help-
ful quick tips. It provides the key Voice Commands and
tips you need to know to control your vehicle’s Voice
Recognition (VR) system.
NOTE:
Voice Recognition is only available on the Uconnect
5 NAV With 10.1-inch Display.
BASIC VOICE COMMANDS
The following Basic Voice Commands can be given at
any point while using your Uconnect system.
Push the VR button on the steering wheel. After
the beep, say a command. You can also say the system
“Wake Up” word and then say a command:
•
“
Cancel
” to stop a current voice session.
•
“
Help
” to hear a list of suggested Voice Commands.
•
“
Repeat
” to listen to the system prompts again.
Notice the visual cues that inform you of your Voice
Recognition system’s status.
GET STARTED
The VR button is used to activate/deactivate your
Voice Recognition system. You can also use the sys-
tem’s “Wake Up” word to activate voice recognition. The
“Wake Up” word can be set through the Uconnect Set-
tings
page 136.
Helpful hints for using Voice Recognition:
•
Reduce background noise. Wind noise and passen-
ger conversations are examples of noise that may
impact recognition.
•
Speak clearly at a normal pace and volume while
facing straight ahead.
•
Each time you give a Voice Command, first push the
VR button, wait until after the beep, then say your
Voice Command. Also, you can say the vehicle
“Wake Up” word to issue a Voice Command. The
available “Wake Up” words are “Hey Uconnect” and
“Hey Ram”.
•
You can interrupt the help message or system
prompts by pushing the VR button and saying a
Voice Command from the current category.
Release/Adjustment Buttons
1 — Release Button
2 — Adjustment Button
44 GETTING TO KNOW YOUR VEHICLE