RAM Commercial ProMaster 2024, Руководство пользователя, Страница: 244 / 284

4. Remove two lower retaining screws from the head-
lamp housing.
5. Pull Headlamp forward, disconnect the harness
electrical connector and remove the headlamp
assembly from vehicle.
6. Rotate the bulb counterclockwise and remove.
7. Install the bulb into socket, and rotate bulb/socket
clockwise into lamp locking it in place.
8. Carefully reinstall headlamp in the same position on
the vehicle, so as not to affect headlamp aiming.
9. Install the one upper retaining screw on headlamp
housing.
10. Install the two lower retaining screws on headlamp
housing.
11. Carefully reinstall the lower headlamp filler panel
and one retaining screw.
12. Carefully reinstall the upper headlamp filler panel
and two retaining screws.
DAYTIME RUNNING LAMP (DRL)/FRONT SIDE
MARKER LAMP
See the following steps to replace:
1. Remove one retaining screw on the lower headlamp
filler panel. Remove filler panel.
2. Remove two retaining screws on the upper head-
lamp filler panel. Remove filler panel.
3. Remove one upper retaining screw from the head-
lamp housing.
4. Remove two lower retaining screws from the head-
lamp housing.
5. Pull Headlamp forward, disconnect the harness
electrical connector and remove the headlamp
assembly from vehicle.
6. Remove the (DRL), side marker bulb by pulling
straight out.
7. Replace lamp as required and lock in place.
8. Reinstall plastic cap.
9. Carefully reinstall headlamp in the same position on
the vehicle, as not to affect headlamp aiming.
10. Install the one upper retaining screw on the head-
lamp housing.
11. Install the two lower retaining screws on the head-
lamp housing.
12. Carefully reinstall the lower headlamp filler panel
and one retaining screw.
13. Carefully reinstall the upper headlamp filler panel
and two retaining screws.
See an authorized dealer for LED bulb replacement.
FRONT FOG LAMPS
See the following steps to replace:
1. Turn front wheels inboard to access cover in wheel
liner.
2. Open the cover on the front of the wheel liner.
3. Remove connection and replace the bulb.
4. Connect the wire and rotate bulb/socket clockwise
into lamp locking it in place.
5. Reinstall the plastic cap and close the cover on the
wheel liner.
See an authorized dealer for LED bulb replacement.
FRONT, REAR ROOF LAMPS
See the following steps to replace:
1. Remove two screw and remove the lamp assembly.
2. Remove the socket bulb by turning
counterclockwise.
3. Remove bulb and replace as needed.
4. Reinstall the bulb socket and rotate clockwise to
lock in place.
5. Reinstall lamp.
REAR TAIL, STOP, BACKUP, TURN SIGNAL
AND REAR SIDE MARKER LAMPS
See the following steps to replace:
1. Open rear doors.
2. Remove the seven (7) fasteners from the rear
access cover and remove cover to gain access to
the tail lamp assembly fasteners.
3. Remove the two (2) 17 mm tail lamp assembly
fasteners.
Rear Access Cover
242 SERVICING AND MAINTENANCE