RAM Commercial ProMaster 2024, Руководство пользователя, Страница: 245 / 284

4. Disconnect the tail lamp harness connector and
remove tail light assembly from the vehicle.
5. Remove the tail/stop, turn signal, backup and rear
side marker bulb/socket by rotating
counterclockwise.
6. Remove the bulb and replace as needed.
7. Reinstall bulb/socket and rotate clockwise to lock in
place.
8. Reinstall lamp.
Replacing Interior Bulbs
CARGO LAMP
See the following steps to replace:
1. Using a suitable tool, remove either the lamp above
the back door or the sliding door lamp as needed
and disconnect it.
2. Using a suitable tool, pull open the metal bulb
access on the back of the housing.
3. Remove and install the replacement bulb.
4. Close the bulb access, connect the lamp and install
the lamp into place.
DOME LAMPS
See the following steps to replace:
1. Using a suitable tool, insert the tip at the location
shown and press inward to the lamp to relieve the
spring tension. This will allow you to easily drop the
dome lamp assembly from its bracket and discon-
nect the lamp.
2. Using a suitable tool, flex the housing to lift the light
pod cover away from the unit.
Rear Cargo Lamp Bulb Access
Cargo Lamp Bulb Location Dome Lamp Assembly Location
1 — Spring Tension Relief Access
2 — Dome Lamp Assembly
Dome Lamp Light Pod Cover
SERVICING AND MAINTENANCE 243
8