RAM Commercial ProMaster 2024, Руководство пользователя, Страница: 42 / 284

WARNING!
•
Adjusting a seat while driving may be dangerous.
Moving a seat while driving could result in loss of
control which could cause a collision and serious
injury or death.
•
Seats should be adjusted before fastening the seat
belts and while the vehicle is parked. Serious
injury or death could result from a poorly adjusted
seat belt.
Forward And Rearward Adjustment
The adjustment bar is at the front of the seat, near the
floor. Pull the bar upward to move the seat forward or
rearward. Release the bar once the seat is in the
desired position. Then, using body pressure, move for-
ward and rearward on the seat to be sure that the seat
adjusters have latched.
Height Adjustment — If Equipped
Without Swivel Seat
The height adjustment levers are located on the center
outboard side of the seat. Lift up on the front lever to
adjust the front of the seat, or lift up on the rear lever to
adjust the rear of the seat.
•
To raise the front or rear of the seat, lift the appro-
priate lever while none or minimal weight is applied
to the seat.
•
To lower the front or rear of the seat, lift the appro-
priate lever while seated or applying weight to the
seat.
With Swivel Seat
The height adjustment knobs are located on the center
outboard side of the seat. Rotate the front knob to
adjust the front of the seat up or down. Rotate the rear
knob to adjust the rear of the seat up or down.
Recliner Adjustment
Without Swivel Seat
The recliner knob is on the rear outboard side of the
seat. To recline the seatback, lean back and rotate the
knob rearward to position the seatback as desired. To
return the seatback to its normal upright position, lean
forward and rotate the knob forward until the seatback
is in the upright position.
With Swivel Seat
The recliner lever is located at the lower front outboard
side of the seat. To recline the seatback, lean forward
slightly, pull the lever outward, lean back to the desired
position and release the lever. To return the seatback to
its normal upright position, lean forward and pull the
lever outward. Release the lever once the seatback is in
the upright position.
WARNING!
•
Adjusting a seat while the vehicle is moving is dan-
gerous. The sudden movement of the seat could
cause you to lose control. The seat belt might not
be adjusted properly and you could be injured.
Adjust the seat only while the vehicle is parked.
•
Do not ride with the seatback reclined so that the
shoulder belt is no longer resting against your
chest. In a collision, you could slide under the seat
belt and be seriously or even fatally injured. Use
the recliner only when the vehicle is parked.
Lumbar Support — If Equipped
This feature allows you to increase or decrease the
amount of lumbar support. The lumbar control knob is
located on the rear upper outboard side of the driver's
seatback. Rotate the control forward to increase and
rearward to decrease the desired amount of lumbar
support.
Seat Adjustment (With Swivel Seat)
1 — Lumbar Knob
2 — Swivel Seat Lever
3 — Forward/Rearward Adjustment Bar
4 — Front Height Adjustment Knob
5 — Rear Height Adjustment Knob
40 GETTING TO KNOW YOUR VEHICLE